Yearly Archives: 2023

2023 Strasburg O Scale Show – April

Posted on by

Today was the Strasburg O Scale Train Show. The Show was very well attended by both table holders and the walk-in attendees through the door. The traffic was steady and busy all through the morning. Which cut down on my ability to get through the hall once the doors opened to the public.

For the Reading modelers in the crowd, I did see a Gem 0-6-0 camelback model on Dave Richter’s tables. I also noticed a couple of the SGL G-3’s and an SGL add on two coach set in the room. Not sure if they found new homes or not. I will tell you a nicely painted Reading Car Works DS4-4-1000 managed to follow me home yesterday. I’ll be posting about that in the next few weeks.

As always it was great to see so many models available for sale. But it was also really nice to see and talk with so many people that we often only get to see in person at the shows. John Dunn was back at the show, now at a table.

They had a couple of clinics during the show. Kerry Kime once again gave her clinic was on making pine trees from heater filters. Kerry did a great job demonstrating haw she has made trees for their home layout using a wood dowel and cut up heater filters. She is also selling trees at her table during the show.

The other clinic was on the Blunami DCC sound decoders. I wasn’t able to get away from my table to attend that one.

After the show, we had a little adventure. We were going to a restaurant for lunch that was about 8 miles from the show. We had five cars headed out for lunch together. The guy leading the group had a different town in mind where the restaurant was. So instead of a short 10 minute drive to lunch it turned into a 45 minute drive. To make matters worse, the guy who knew where we were going managed to loose the four cars following him.

Lucky for us John Dunn remembered the town name where we were going and put that into his navigation. But it did give us a nice scenic drive on some roads without a lot of traffic.

We finally arrived at the restaurant after about a forty minute drive. Then shared in some good-hearted ribbing of the driver that lost us, we all sat down for a late lunch. It all worked out fine, lots of good stories were shared.

April Fools’ Day

Posted on by

So, I drove 120 miles, one way, today to go to the 2023 Harrisburg All O Scale Meet…
Then I remembered it was April Fools’ Day.

All kidding aside, this is and was a small show. Even though the show was promoted as an “All O Scale Meet” featuring “O Scale 2 Rail – O Scale Traction- Proto48 – On3 On30 – On2 – On18” the dealers were split about 60-40 narrow gauge to standard gauge.

I didn’t see ANY Proto48 at the show.
But I did see some 3 rail and a bunch of tables with S Scale parts.

The O Scale 2 rail dealers were the same dealers I would have seen at Chicago two weeks ago (if I had gone this year) and at the Strasburg Show two weeks from now.

One dealer I had not seen before was Les Davis, who had some absolutely wonderful 3D resin printed figures. That was one of the highlights of the show for me. I did bring home a few of the figures.

Getting the chance to speak with Les at the show was great. It turns out these figures are scanned from real people, mostly his friends, and reduced down to O Scale size. It took a while for that thought to really sink-in with me. Later, I realized, that opens up the possibility of being scanned and an O Scale version of yourself being placed your railroad or in your favorite locomotive. Kind of a cool thought.

Continuing with the 3D printed thought, Dylan Lambert had a sample of the the B&A passenger car and lots of his PCC car drives at the show. So I guess the drives covered the part of the O Scale Traction in the promotions.

There were a couple of table of buildings for sale. But there wasn’t a lot of movement on these tables. Same thing with the one vendor with built up trees and tree building materials. While I thought his prices were very good for the high level of quality of his trees. He seem to have the same amount on his table when I was leaving the show as when I arrived.

After I left the show, I had to sneak over to Enola. I used to shot on the overlook bridge a lot back in the late ’80’s. They have since rebuilt the bridge with openings in the fence on the bridge. It was nice to be back there and catch a couple of trains coming into the yard. I always liked the overhead angles that this location provided. Now with the fixed positions to see through the fencing, the views are a little more restricted than I remember.

Late today I received a message from my traveling companion for the day, “the dealer table sales for the show were up 50% over last year.” Wow, now I’m really glad I did not go last year. I thought this was a small show this year.

So the big question of the day, how was the show? I did buy from three different dealers today. Two of which, I would have seen two weeks ago in Chicago, if I had gone. I think next year I’ll just make sure I go to Chicago and buy from them out there.

April Fools’ Day joke or O Scale Show?
They worked out to be about the same today.

Your mileage may vary.

Mother Seton Train Show

Posted on by

I attended the Jersey Central Railroad Historical Society’s Train Show in Clark, NJ today. This show is billed as a railroadiana & model train show, or as I have referred to as a “paper show.” Lots of books, magazines, photos, slides, timetables, lanterns and memorabilia. This show was all that.

I was happy to see a number of O Scale modelers at the show that I normally see at our local O Scale shows. There were some models at the show, mostly in the smaller scales but there was one table with O Scale 2-rail models.

But that really wasn’t why I was there. I did bring home another Car Builders Cyclopedia today and a couple of new books. Some of the best purchases of the day were the photographs I picked up from Bob’s Photo. Some good reference for projects that should hit the workbench this year.

Can You Believe It’s February Already?

Posted on by
A busy workbench

I haven’t been up to that much. Mostly working on some of the cars I painted last Summer. In the above image there is a mixture of cars being decorated and in the case of the two PRR H30’s, they were decorated back when I was modeling a PRR branch set in 1956. So I was changing the weight dates on the two cars to be correct for my summer of 1952 period.

I went to work on the trucks, first thing was to polish the treads. Then, I noticed that they did not have the trucks numbered for the cars. So now they do.

Here are a pair of Hallmark B&O class N34 covered hopper cars that were painted last Summer. They are nice cars but they do show their age a little. I found both of these cars unpainted at two different Cleveland O Scale shows at least ten years ago.

They came out nice. I used a combination of both Tichy decals and also K4 decals for the cars. Both set were not totally complete, together they were fine.

This last image shows a little work on the roof walks. Gene Diemling wrote about a product from AK Interactive in his post NEW PRODUCTS: A Few Good Things & Wood! I thought I’d try it out. After a couple of tests on some scrap plastic, I thought I’d try it on the B&O car. Almost there. I think it could use a thin black wash still. But I’ll wait until I get into some of the weathering on the cars.